Hello,
We have developed a custom hardware using DA14682 module and we are using an external JTAG from dialog semiconductor to flash the board. However the JTAG itself is not detected. Please let us know where we are going wrong.
Thanks and Regards
Raj Johri
Dear Dialog support,
在我的测试与DA14580燃烧SmartSnippets, I found that the JTAG is very hard to connect to the chip when the flash is burned with the code. I have to try unplug and plug for many times to get one success. Attached below is one of my log.
At the same time ( with the same code burning in the flash), the Keil can connect to the chip and download/debug the code without such difficulty. Some time it prompts 'can't find the device. I just need to unplug and plug for 1 time, everything will be fine.
