Hi Dialog,
I am validating proximity example using external processor by referring the manual UM_B_013_0.pdf.
In this manual they asked to do some jumper setting in connector J15 for enabling LED D1 & button K1 but these (J15 connector & K1) are not available in my da14580devkt-pro board.
I have attached my da14580devkt-pro board image for reference.
Can you provide which one is wrong ? OR suggest me the correct document ?
Device:
Hi RatheeshT,
The document is based on the expert kit that is why you dont see the connectors that the document mentions. On the pro kit the pins there is also a led and two user buttons, the led header is the J9 that routes the P1_0 to the LED and the push button pins are fixed to the P0_6 and P1_1 pins.
Thanks MT_dialog