I am working with the DA14583. I read Training_06_suota_example_v1.1.pdf 我正在使用SDK 5.0.3。 I cannot find "DA1458x_SUOTA_Multipart_Binary_Generator.zip" file
You will be able to get the file in the Documents tab, under the Tutoral section, the tutorial's name in Tutorial 6 : SUOTA TOOL ZIP FILE, since on every document release the link is probably changed, please check the path mentioned above since the links sometimes might be broken. Anyway i ve attached the new link here.
Please follow the description mentioned above in order to reach the .zip file, the documents are updated frequently and the links keep changing, please navigate to the Documents in the Tutorials section.
The most possible reason why you get “invalid product header” is that the offsets of the images reside. Be aware that the DA14585 supports larger images, so you will have to increase the size of the offsets in the flash. Please, open the project_multipart_binary_v2.py and alter the values in the following variables just like below:
I'm using the "prox_reporter" example for checking the SUOTA on IOS device, so if possible send a zip file compressed of the FW1 and FW2 as specified in the SUOTA tutorial, As i attached mine earlier. Thanks in advance.
Could you please clarify if you are using a custom board or any of our developments kits? I tested the SUOTA feature in iOS device using the prox_reporter example of the SDK, but I am not able to replicate your problem. You will find attached the output folder of the DA1458x_SUOTA_Multipart_Binary_Generator_v0.
谢谢for your question. Could you please raise a new forum ticket as this one is very old and closed? In case of DA14531, please check the following tutorial:
Hi ronald,
检查此链接https://support.dialog-semiconductor.com/resource/tutorial-3-suota-tool-...
谢谢MT_dialog
thanks
This link says you need to register or login. I'm logged in, and it is not working.
Hi JBaczuk,
The link has been changed since i ve made that post, should be ok now, please check again.
谢谢MT_dialog
是的，它现在工作，谢谢。
你好 ：
I want to get this file, but this link says you need to register or login. I'm logged in, and it is not working.
Can you help me ?
Hi dragonzhangcl,
You will be able to get the file in the Documents tab, under the Tutoral section, the tutorial's name in Tutorial 6 : SUOTA TOOL ZIP FILE, since on every document release the link is probably changed, please check the path mentioned above since the links sometimes might be broken. Anyway i ve attached the new link here.
https://support.dialog-semiconductor.com/resource/tutorial-6-suota-tool-...
谢谢MT_dialog
Where can I find this tool? The link is no longer valid
嗨HCHAN，
Please follow the description mentioned above in order to reach the .zip file, the documents are updated frequently and the links keep changing, please navigate to the Documents in the Tutorials section.
谢谢MT_dialog
This link says you need to register or login. I'm logged in, and it is not working.
Hi Henson-Qui,
我想你的意思是Suota工具zip文件，你的帐户似乎是好的，至少在我身边，我能够下载.zip文件，请你能注销并在解决你的问题的情况下再次登录吗？此外，我想你正在尝试通过文档页面访问文件，而不是我在上一篇文章中提供的链接（因为我提供的是已经过时的，并且在后面的帖子上有迹象表明这一点）。
谢谢MT_dialog
Even I am working with the DA14583.
I cannot find "DA1458x_SUOTA_Multipart_Binary_Generator.zip" file
哪里可以获得文件？
嗨Jagath，
For downloading the DA1458x_SUOTA_Multipart_Binary_Generator.zip file, please hit to the link below:
https://support.dialog-semiconductor.com/resource/tutorial-6-suota-tool-zip-file
For getting more information about the SUOTA, it is strongly recommended to read the Training_06_suota_example_v1.3 training document:
https://support.dialog-semiconductor.com/resource/tutorial-6-adding-sotware-update-over-air-suota
您能够从我们的BLE Portal页面上加载DA1458x芯片的所有可用文档和培训：
https://support.dialog-semiconductor.com/connectivity
谢谢, PM_Dialog
hi PM_Dialog,
根据教程，FW_MULTI_PART_SPI.BIN在输出文件夹中生成，我使用智能片段将FW刻录到电路板中，但电路板似乎没有启动。虽然我也试图在调试模式下运行“fw_1”的代码，但我可以在苏格塔应用程序中跟踪设备，而我试图将“fw_2.image”更新为它“生成”无效的产品标题“。请告诉我下一步继续。
hi PM_Dialog,
Here by i attached the output zip folder which i generated, kindly verify it or send the output folder generated by you.
嗨Jagath，
The most possible reason why you get “invalid product header” is that the offsets of the images reside. Be aware that the DA14585 supports larger images, so you will have to increase the size of the offsets in the flash. Please, open the project_multipart_binary_v2.py and alter the values in the following variables just like below:
MEM_LOC_FOR_FW_1_IMG = "0x8000"
mem_loc_for_fw_2_img =“0x1f000”
mem_loc_for_product_header =“0x38000”
这将在您的图像之间提供更多空间。值0x8000是第一个图像偏移量，0x1f000是第二个图像偏移，0x38000是您产品标题的偏移量。完成此操作后，您应该将图像刻录到585的闪光灯中。
谢谢, PM_Dialog
hi PM_Dialog,,
i have changed these values
MEM_LOC_FOR_FW_1_IMG = "0x8000"
mem_loc_for_fw_2_img =“0x1f000”
MEM_LOC_FOR_PRODUCT_HEADER = " 0 x38000”。
on the multi part .py , and attached the screen shot of the error i was hanging up with.
hi PM_Dialog,,
On reference to the previous comment, we are not using DA14585 , we are using DA14583 SOC.
嗨Jagath，
道歉，但我以为你是指585芯片。如果您获得“无效的产品标题”错误，这意味着产品标题已损坏，则课题预计将从产品标题读取图像的位置，然后在执行它之前检查其是0x70和0x52的产品标题签名位置0x1f000，如果产品标题与我提到的签名字节不匹配，则应用程序返回“无效的产品标题”消息。因此，我建议您在该特定位置检查闪光灯，并检查数据是否与产品标题签名的数据匹配。此外，您能否在您努力的情况下澄清？
谢谢, PM_Dialog
hi PM_Dialog,
I'm using the "prox_reporter" example for checking the SUOTA on IOS device, so if possible send a zip file compressed of the FW1 and FW2 as specified in the SUOTA tutorial, As i attached mine earlier. Thanks in advance.
嗨Jagath，
Could you please clarify if you are using a custom board or any of our developments kits? I tested the SUOTA feature in iOS device using the prox_reporter example of the SDK, but I am not able to replicate your problem. You will find attached the output folder of the DA1458x_SUOTA_Multipart_Binary_Generator_v0.
谢谢, PM_Dialog
Hi,
I am working with the DA14531.
I cannot find "DA1458x_SUOTA_Multipart_Binary_Generator.zip" file.
谢谢
Hi divyesh,
谢谢for your question. Could you please raise a new forum ticket as this one is very old and closed? In case of DA14531, please check the following tutorial:
http://lpccs-docs.dialog-semiconductor.com/Tutorial-BLE-SUOTA-DA145x/index.html
谢谢, PM_Dialog