Switching Transient Artifacts of Current Measurement Circuit

⚠️
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at//www.xmece.com/support. We’ll be fixing bugs / optimising the searching and tagging over the coming days.
3 posts / 0 new
Last post
Mon, 2020-03-16 09:20
#1
Peter Luo
Offline
Last seen:1 week 4 days ago
加入:2016-01-17 13:37
Switching Transient Artifacts of Current Measurement Circuit

Hi Dialog,

The document://www.xmece.com/sites/default/files/um-b-114_da1453...says:

9.1 Switching Transient Artifacts of Current Measurement Circuit
When the current measurement circuit changes scale, it presents some small or large voltage step
on the A/D converter inputs. An ideal converter (infinite bandwidth) would produce a single spike at
the point of switching. But since the converter is not ideal, it produces a ringing like waveform (Figure
52).

How about DA1469X Development Kit – Pro? It adopts simliar current measurement circuit, has same issue?

Thanks, Peter

Device:
DA1469x
Mon, 2020-03-16 12:19
PM_Dialog
Offline
Last seen:2 days 17 min ago
Staff
加入:2018-02-08 11:03
Hi Peter Luo,

Hi Peter Luo,

Please check out theUM-B-093 User Manual: DA14695 Pro Kit. In section 3.7 Current Measurement Section in DA1469x DK PRO, you will find that the only known limitation is that the measurement accuracy between 500 µA and 1 mA is worse than the typical 1% we have in all other cases (from 1 µA to 250 mA).

Thanks, PM_Dialog

Accepted answer
Mon, 2020-03-16 12:46
Peter Luo
Offline
Last seen:1 week 4 days ago
加入:2016-01-17 13:37
Hi Dialog,

Hi Dialog,

Very happy to hear DA1469X Development Kit Pro has no switching transient artifacts issue.

Thank you so much!

Peter

Accepted answer