⚠️
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at//www.xmece.com/support. We’ll be fixing bugs / optimising the searching and tagging over the coming days.
8 posts / 0 new
Last post
MaxwellForest
Offline
Last seen:2 months 4 weeks ago
Joined:2015-08-18内
"Max Frequency Drift" fail

I have a proximity design based on the DA14580 tag application note.
It is currently undergoing BLE 4.1 certification testing and is failing the "Max Frequency Drift" test.

I have attached the report from the test house. I am confirming that the 16M crystal was "tuned" but at this stage this is our assumption according to the factory.
Can you shed any light on this, and is there anything we need to do?

regards

Anthony

Device:
MT_dialog
Offline
Last seen:2 months 1 week ago
Staff
Joined:2015-06-08 11:34
Hi Maxwell Forest,

Hi Maxwell Forest,

Can you please let me know about the SDK that you are using ?

Thanks MT_dialog

MT_dialog
Offline
Last seen:2 months 1 week ago
Staff
Joined:2015-06-08 11:34
嗨,麦克斯韦,

嗨,麦克斯韦,

Also can you please provide, schematic, BOM and layout in order to have a look ?

Thanks MT_dialog

MaxwellForest
Offline
Last seen:2 months 4 weeks ago
Joined:2015-08-18内
Hi there,

Hi there,

最初的设计佤邦s proto-typed using a DA-14580 packaged chip, production is using a die. The schematic is the same as the proximity tag application, although we have properly implemented the FET control of the FLASH, that was not operational in the code supplied by Dialog.

Note after antenna tuning component position " L2" is now a 1.5pF capacitor, and position "C9' is now a 15nH inductor.

Also note there additional components on the schematic that are not fitted and are for future use:

Not fitted: D2, D3, D4, R7, R8, R9, LS1 R10, R11, R12, R13, R14, R15, R16, Q1.

Note also that there are additional pads for the Wire bond out testing.

My S/W guy is on leave, but I will back to you soon with the SDK details

This schematic is private and confidential.

regards

Anthony

MaxwellForest
Offline
Last seen:2 months 4 weeks ago
Joined:2015-08-18内
Please put this on hold for

Please put this on hold for the moment, I can confirm that the 16M crystal was not calibrated, on average that would mean it was -22ppm low in frequency.

We will correct this and retest and keep you posted.

regards

Anthony

uta_lc
Offline
Last seen:1 year 2 weeks ago
Joined:2016-05-03 07:39
Hi guys, the SDK we are using

Hi guys, the SDK we are using is 5.0.3.

MT_dialog
Offline
Last seen:2 months 1 week ago
Staff
Joined:2015-06-08 11:34
Hi MaxwellForest,

Hi MaxwellForest,

Is there any update on the ticket ? Have you retested the device ?

Thanks MT_dialog

MaxwellForest
Offline
Last seen:2 months 4 weeks ago
Joined:2015-08-18内
This was a false alarm. The

This was a false alarm. The 16M crystal had not been calibrated at the factory prior to testing. Calibration fixed the problem.