开发了模式下游的程序，电影后需要新写入？

刚刚刚刚PAN1740A蓝牙蓝牙，PAN1740A的MCU使使用DA14585。

数码手册上说：在开发模式环境下，MCU的程序是写入ram中

以下是数码手册

"During development mode phase application code is developed using the ARM Cortex-M0 SW environment. The compiled code is downloaded into the System RAM or any retention RAMs by means of SWD (JTAG) or any serial interface (e.g. UART). Address 0x00 is remapped to the physical memory that contains the code and the CPU is configured to reset and execute code from the remapped device. This mode enables application development, debugging and on-the-fly testing."

是不是是，开发了下雨的程度在断电脑会上？

手上有开发仪，本来用探针，把usb开发诗的作用产工具来工。

OTP一次性写入写入，更多点（脱离开发的）测试