嗨,团队,
Recently, I am suffering from binary size issue in DA1469x.
Before considering increase 512KB limit described inhttp://lpccs-docs.dialog-semiconductor.com/tutorial_da1469x_supporting_fw_images_bigger_than_512kb/index.html, I noticed that dg_configQSPI_CODE_SIZE_AA is set to 370KB, but some examples modify this value to increase binary size.
In the commentation, it says "take into account CMI firmware".
你好我使用da1469x 的plt_fw
我想要做一個功能
一個按鍵 ,我要按一下去切換定頻發射的東西.
我在按鍵的lebel 放好hci的內容 是去call這個嗎?
void hci_custom_action(dgtl_msg_t *msg);
我目前按下按鍵後 _rf_master UART會顯示收到
payload: 0E 04 01 1E 20 00
但是使用RF_MASTER 送一樣的指令UART會收到
payload: 0E 04 07 1E 20 00
方式錯誤?
Hi, teams.
Trackinghttps://support.dialog-semiconductor.com/forums/post/dialog-smartbond-bluetooth-low-energy-%E2%80%93-software/binary-too-big-if-emwin-font-includedissues, I just noticed the new emWin library & example is uploaded.
Trying to use XBF fonts, found that it should be written prior in a separated partition.
Dear community,
I have development kits for the three systems and I want to build a location system via bluetooth. What do I need to do? I have literally no idea. Is it even possible to do that with the systems? How accurate would at be? I need accuracy about 5-10cm.
Thanks for your help.
Regards,
Philipp
你好,
我有da1469x的direct_test 有疑問要詢問,
我想要讓他發出定頻_Tx_Rx之類的動作.
我手上有開發工具,已經把external_ble 燒入qspi, 並且可以透過Rf_MASTER 發射出頻率了
(且韌體已經修改成CTS/RTX=>DISABLE完成)
1.我可以使用DA14580的prodtest.exe作為傳輸下指令方式嗎?
2.除了RF_MASTER 跟REAL_TERM有沒有其他簡易的下發射指令的方式?
謝謝,
I am a software guy, with very little hardware experience.
I am excited by BLE 5.1 and its location & distance functionality, using AoD & AoA.
Hi
I have a new custom pcb with the following problem: UART works (with empty flash) but when I try to program the flash memory through Serial, I get the following error:
Hi there,
I designed a custom PCB prototype with a DA14695 on it. What is the best way to program it? I was planning on using the serial interface with UTX, URX, URTS, UCTS (P0_7-0_9, P1_0) with a USB adapter (TTL-232R-3V3). However, somehow this does not work. I also tried using the serial interface from the DEV-Kit motherboard without the daughterboard plugged in and connected it to my prototype which does not work either. I also tried using SWD from the Dev-Kit (without a daughterboard plugged in) to the prototype which again fails.
I have the da14695 development kit pro and I have just ran a couple basic programs on it. I was wondering how I would go about creating a custom characteristic.
Hello,
I'm still testing l2cap bandwidth with two usb dev kits(see my earlier post on Wed, 2020-01-01 16:24 ). I see certain patterns, which I can not explain.
