Production Line Tool execute screen

Thanks dialog

I just updated all screen.
I also re-install several times, and problem is same.

My params.ini is bellow.
Very Thanks.

-----------------------------------------------
------------- PLT Configuration ---------------
-----------------------------------------------

-----------------------------------------------
------------- Execution -----------------------
-----------------------------------------------
tests_enable = true
programming_enable = true
-----------------------------------------------
------------- GPIOs ---------------------------
-----------------------------------------------
uart_boot_pins = 0
uart_programming_enable = false
uart_port_tx = 0
uart_pin_tx = 0
uart_port_rx = 0
uart_pin_rx = 1
baud_rate = 115200
vpp_control_port = 1
vpp_control_pin = 2
vpp_control_enable = false
spi_pins_enable = false
spi_clk_port = 0
spi_clk_pin = 0
spi_di_port = 0
spi_di_pin = 5
spi_do_port = 0
spi_do_pin = 6
spi_cs_port = 0
spi_cs_pin = 3
i2c_pins_enable = false
i2c_scl_port = 0
i2c_scl_pin = 2
i2c_sda_port = 0
i2c_sda_pin = 3
xtal_trim_gpio_port = 0
xtal_trim_gpio_pin = 1
-----------------------------------------------
------------- Test Settings -------------------
-----------------------------------------------
rf_test_enable_1 = true
rssi_limit_1 = -70.000000
frequency_1 = 2450
rf_test_enable_2 = false
rssi_limit_2 = -70.000000
frequency_2 = 2402
rf_test_enable_3 = false
rssi_limit_3 = -70.000000
frequency_3 = 2402
audio_test_enable = false
audio_pwr_lvl = 0000
xtal_trim_enable = false
xtal_trim_burn_otp = false
custom_data_enable = false
custom_data_value = 00
scan_enable = false
-----------------------------------------------
------------- Memory Functions ----------------
-----------------------------------------------
otp_write_enable = true
otp_readback = true
otp_image_path = D:\DA14580\DA14580_Production_Line_Tool_v_3.170.2.36\executables\binaries\prox_reporter_16B2.bin
spi_write_enable = false
spi_readback = false
spi_bootable = false
spi_start_addr = 0000
spi_image_path =
eeprom_write_enable = false
eeprom_readback = false
eeprom_bootable = false
eeprom_start_addr = 0000
eeprom_image_path =
-----------------------------------------------
------------- OTP Header -----------------------
-----------------------------------------------
otp_write_header = true
otp_header_readback = true
bd_addr_load_from_file = true
bd_address_file_path = D:\DA14580\DA14580_Production_Line_Tool_v_3.170.2.36\executables\params\bd_address.ini
start_bd_addr = CC:1B:E0:00:04:22
otp_xtal16_trim_val = 00:00:04:4C
otp_xtal16_trim_flag = true
otp_jtag_enable = true
otp_32khz_source = 1
otp_dma_len = 00:00:16:B2
sw_customer_field = false
otp_customer_field_1 = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
otp_customer_field_2 = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
otp_customer_field_3 = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
otp_customer_field_4 = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
otp_customer_field_5 = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
otp_customer_field_6 = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
otp_customer_field_7 = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
otp_customer_field_8 = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
otp_customer_field_9 = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
otp_customer_field_10 =00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
otp_customer_field_11 = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
otp_customer_field_12 = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
otp_customer_field_13 = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
otp_customer_field_14 = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
otp_customer_field_15 = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
otp_customer_field_16 = 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
otp_appl_flags_1_2 = true
-----------------------------------------------
------------- HW Setup ------------------------
-----------------------------------------------
station_id = Test_05
dut_ic = 0
dut_num_1 = false
dut_num_2 = false
dut_num_3 = false
dut_num_4 = true
dut_num_5 = false
dut_num_6 = false
dut_num_7 = false
dut_num_8 = false
dut_num_9 = false
dut_num_10 = false
dut_num_11 = false
dut_num_12 = false
dut_num_13 = false
dut_num_14 = false
dut_num_15 = false
dut_num_16 = false
gu_com_port = 29
-----------------------------------------------
------------- Debug Settings ------------------
-----------------------------------------------
ui_debug_enable = false
ui_debug_output_stdio = false
ui_debug_output_file = false
ui_debug_output_clbk = false
ui_debug_level_error = false
ui_debug_level_info = false
ui_debug_level_debug = false
ui_debug_file_path = X:\2014\Smart 보청기\SW\Dailog\src\SDK_3.0.10.1\DA14580_Production_Line_Tool_v_3.170.2.36\DA14580_Production_Line_Tool_v_3.170.2.36\executables\UI_debug.txt
pltd_debug_enable = false
pltd_debug_output_stdio = false
pltd_debug_output_file = false
pltd_debug_output_clbk = false
pltd_debug_level_error = false
pltd_debug_level_info = false
pltd_debug_level_debug = false
pltd_debug_file_path = X:\2014\Smart 보청기\SW\Dailog\src\SDK_3.0.10.1\DA14580_Production_Line_Tool_v_3.170.2.36\DA14580_Production_Line_Tool_v_3.170.2.36\executables\PLTD_debug.txt
pdll_debug_enable = false
pdll_debug_output_stdio = false
pdll_debug_output_file = false
pdll_debug_output_clbk = false
pdll_debug_level_error = false
pdll_debug_level_info = false
pdll_debug_level_debug = false
pdll_debug_file_path = X:\2014\Smart 보청기\SW\Dailog\src\SDK_3.0.10.1\DA14580_Production_Line_Tool_v_3.170.2.36\DA14580_Production_Line_Tool_v_3.170.2.36\executables\PDLL_debug.txt
udll_debug_enable = false
udll_debug_output_stdio = false
udll_debug_output_file = false
udll_debug_output_clbk = false
udll_debug_level_error = false
udll_debug_level_info = false
udll_debug_level_debug = false
udll_debug_file_path = X:\2014\Smart 보청기\SW\Dailog\src\SDK_3.0.10.1\DA14580_Production_Line_Tool_v_3.170.2.36\DA14580_Production_Line_Tool_v_3.170.2.36\executables\UDLL_debug.txt