关于栈被自己重置和数据丢失

嗨,对话框中,

我现在使用堆栈来做广告，我通过使用计时器设置的时间是2.5秒。我在我的程序中使用“current_role”来控制程序“app_task.c”和“app.c”中的角色切换。但是当它运行25次进行角色切换时，会重置整个程序，之前放入ram的东西都丢失了，你能帮忙解决这个问题吗?

下面是app_task.c程序的一部分:
Extern volatile uint8_t current_role;

Int app_switch_role(ke_msg_id_t msgid, void *param, ke_task_id_t dest_id, ke_task_id_t src_id)
｛
app_gapm_reset_op ();

返回(KE_MSG_CONSUMED);
｝

静态const struct ke_msg_handler app_gap_process_handlers[]=
｛
(ke_msg_func_t) gapm_device_ready_ind_handler}, {GAPM_DEVICE_READY_IND
(ke_msg_func_t) gapm_cmp_evt_handler}, {GAPM_CMP_EVT
(ke_msg_func_t) gapc_cmp_evt_handler}, {GAPC_CMP_EVT
(ke_msg_func_t) gapc_connection_req_ind_handler}, {GAPC_CONNECTION_REQ_IND
(ke_msg_func_t) gapc_disconnect_ind_handler}, {GAPC_DISCONNECT_IND
(ke_msg_func_t) app_module_init_cmp_evt_handler}, {APP_MODULE_INIT_CMP_EVT
(ke_msg_func_t) gapm_adv_report_ind_handler}, {GAPM_ADV_REPORT_IND

(ke_msg_func_t) app_update_adv_data}, {APP_DYNAMIC_ADV_DATA
(ke_msg_func_t) app_switch_role}, {APP_SWITCH_ROLE_TIMER
}；

Int gapm_cmp_evt_handler(ke_msg_id_t)
Struct gapm_cmp_evt const *参数，
ke_task_id_t const dest_id,
ke_task_id_t const src_id)
｛
开关(param - >操作)
｛
/ /复位完成
案例GAPM_RESET:
｛
如果(param - >状态! = GAP_ERR_NO_ERROR)
｛
ASSERT_ERR (0);/ /意想不到的错误
｝
其他的
｛
//设置设备配置
app_easy_gap_dev_configure ();

#如果DEBUG_LOG33
printf_string(“GAPM_RESET \ r \ n \ r \ n”);
uart2_init (UART_BAUDRATE_115K2 3);
# endif
｝
｝
打破;

//设备配置更新
案例GAPM_SET_DEV_CONFIG:
｛
如果(param - >状态! = GAP_ERR_NO_ERROR)
｛
ASSERT_ERR (0);/ /意想不到的错误

/ / niklas
#如果DEBUG_LOG33
printf_string(“\ \ nError253 \ r \ n”);
uart2_init (UART_BAUDRATE_115K2 3);
# endif
｝

其他的
｛

如果(1 == current_role)
｛
#如果DEBUG_LOG2
printf_string(“\ r \ nAdv1”);
printf_byte (position1);
printf_string (" \ r \ n ");
uart2_init (UART_BAUDRATE_115K2 3);
# endif
record3 ();
EXECUTE_CALLBACK_VOID (app_on_set_dev_config_complete);
position1 + +;
｝

其他的
｛

#如果DEBUG_LOG2
printf_string(“\ r \ nAdv2”);
printf_byte (position1);
printf_string (" \ r \ n ");
uart2_init (UART_BAUDRATE_115K2 3);
# endif
record3 ();
EXECUTE_CALLBACK_VOID (app_on_set_dev_config_complete);
position1 + +;
｝
ke_timer_set (APP_SWITCH_ROLE_TIMER TASK_APP 250);/ / 100 * 10 ms

｝
｝
打破;

/ /广告完成
案例GAPM_ADV_NON_CONN:
案例GAPM_ADV_UNDIRECT:
｛
#如果DEBUG_LOG33
printf_string(“GAPM_ADV_UNDIRECT \ r \ n \ r \ n”);
uart2_init (UART_BAUDRATE_115K2 3);
# endif

EXECUTE_CALLBACK_PARAM (app_on_adv_undirect_complete param - >状态);

｝
打破;

//定向广告完成
案例GAPM_ADV_DIRECT:
｛
#如果DEBUG_LOG33
printf_string(“GAPM_ADV_DIRECT \ r \ n \ r \ n”);
uart2_init (UART_BAUDRATE_115K2 3);
# endif

EXECUTE_CALLBACK_PARAM (app_on_adv_direct_complete param - >状态);
｝
打破;

案例GAPM_SCAN_ACTIVE:
案例GAPM_SCAN_PASSIVE:
｛
#如果DEBUG_LOG33
printf_string(“\ r \ n GAPM_SCAN_PASSIVE: \ r \ n”);
uart2_init (UART_BAUDRATE_115K2 3);
# endif

EXECUTE_CALLBACK_VOID (app_on_scanning_completed);
｝
打破;

案例GAPM_CONNECTION_DIRECT:
if (param->status == GAP_ERR_CANCELED) / /取消取消
｛

#如果DEBUG_LOG33
printf_string(“\ r \ n GAPM_CONNECTION_DIRECT: \ r \ n”);
uart2_init (UART_BAUDRATE_115K2 3);
# endif

EXECUTE_CALLBACK_VOID (app_on_connect_failed);
｝
打破;

案例GAPM_CANCEL:
｛
#如果DEBUG_LOG33
printf_string(“\ r \ n GAPM_CANCEL: \ r \ n”);
uart2_init (UART_BAUDRATE_115K2 3);
# endif

如果(param - >状态! = GAP_ERR_NO_ERROR)
｛
ASSERT_ERR (0);/ /意想不到的错误
｝
如果(app_process_catch_rest_cb ! = NULL)
｛
app_process_catch_rest_cb(参数,是否dest_id src_id);
｝
｝
打破;

默认值:
如果(app_process_catch_rest_cb ! = NULL)
｛
#如果DEBUG_LOG33
printf_string(“\ r \ ndefault: \ r \ n”);
uart2_init (UART_BAUDRATE_115K2 3);
# endif

app_process_catch_rest_cb(参数,是否dest_id src_id);

｝
打破;
｝

返回(KE_MSG_CONSUMED);
｝

以下是app.c的部分程序:

Volatile常量uint8_t current_role = 1;//

* app_easy_gap_dev_config_create_msg(无效)
｛
//为GAP分配消息
if (set_dev_config_cmd == NULL)
｛
struct gapm_set_dev_config_cmd * cmd;
cmd = app_gapm_configure_msg_create ();
set_dev_config_cmd = cmd;

如果(USER_CONFIG)
｛
cmd - >操作= GAPM_SET_DEV_CONFIG;

如果(1 == current_role)
｛
cmd - >角色= user_gapm_conf.role;
current_role = 0;
｝

其他的
｛
cmd - >角色= user_gapm_conf.role;
current_role = 1;
｝

cmd - >外观= user_gapm_conf.appearance;
cmd - > appearance_write_perm = user_gapm_conf.appearance_write_perm;
cmd - > name_write_perm = user_gapm_conf.name_write_perm;
cmd - > max_mtu = user_gapm_conf.max_mtu;
cmd - > con_intv_min = user_gapm_conf.con_intv_min;
cmd - > con_intv_max = user_gapm_conf.con_intv_max;
cmd - > con_latency = user_gapm_conf.con_latency;
cmd - > superv_to = user_gapm_conf.superv_to;
cmd - >标志= user_gapm_conf.flags;
memcpy (cmd - > irk.key、user_gapm_conf.irk KEY_LEN);
｝
其他的

Memcpy ((void*)cmd， (void*)&default_set_dev_config, sizeof(struct gapm_set_dev_config_cmd));

｝
返回(set_dev_config_cmd);
｝