Program DA14580 OTP memory

19个帖子/ 0新
Topic locked
Last post
Sat, 2015-12-05 11:22
＃1
DV.
Offline
Last seen:5 years 2 months ago
Joined:2015-10-09 17:13
Program DA14580 OTP memory

Hi,

I am currently working with DA14580 Basic Kit and with SDK 5.0.3. I have following two queries;

1.目前使用keil我在RAM上运行我的代码，但如何为生产进行编程OTP内存。
2. How to use the Basic Kit to program the RAM as well as OTP memory of DA14580 based Module.

感谢您的快速回复。

Thanks,
DV.

设备：
DA14580
星期一，2015-12-07 16:51
MT_dialog
Offline
Last seen:3 months 3 days ago
Staff
Joined:2015-06-08 11:34
Hi DV,

Hi DV,

You can use Smart Snippets or the CLI tool to program the OTP, also you can use it for developing purposes to program the sysram using the UART interface.

As far as programming your custom board using your dev kit there is no app note for this can you please follow the posts below:

http://support.dialog-semiconductor.com/programming-external-board-basic...

Thanks MT_dialog

Mon, 2015-12-07 17:41
DV.
Offline
Last seen:5 years 2 months ago
Joined:2015-10-09 17:13
Hi MT_Dialog,

Hi MT_Dialog,

Thanks for your reply!

那么有没有说明如何使用智能片段或CLI来编程Sysram / OTP？

Also I read the post you have mentioned, but it is not describing the connection need to be made between Basic Development Kit and a DA14580 module. So it would be great if you can explain that here it self.

Thanks,
DV.

星期二，2015-12-08 16:36
MT_dialog
Offline
Last seen:3 months 3 days ago
Staff
Joined:2015-06-08 11:34
Hi DV,

Hi DV,

是的，您可以在智能代码段中的文档中找到更多关于编程的信息，并在智能代码段的文档中帮助PDF（在Smart Scepets Tool检查帮助选项中），在文件末尾您可以找到关于CLI的一些示例。

The configuration about programming using the dev kit is:

SWCLK -> TCK
SWDIO -> TMS
vbat - > vbat580
GND - > GND
VPP -> TP2 (please place the OTP jumper as well in order to burn the OTP)

Thanks MT_dialog

Mon, 2015-12-28 17:25
DV.
Offline
Last seen:5 years 2 months ago
Joined:2015-10-09 17:13
Hi MT_Dialog,

Hi MT_Dialog,

感谢您的快速回复。

We have tried following connections :

模块侧 - 开发套件侧
SWCLK - Pin 27 of J4 (TCK)
SWDIO - J4的PIN 25(TMS)
VBAT - Pin 1 of J4 (VBAT)
J4（GND）的GND - PIN 2

But with above mentioned I am not able to program the DA 14580 based module. I am getting "No Cortex-M SW device found." error while programming using uVision Keil v5.16a.

I am not able to understand what I am doing wrong. Can you please help me here?

Thanks,
DV.

星期二，2015-12-29 02:19
wi_dialog.
Offline
Last seen:1天2小时前
Staff
Joined:2014-01-03 16:21
Suggest to do the OTP

建议进行OTP编程，如下所示：
1. Unplug the USB and disconnect the basic kit from PC.
2. Wiring between module and basic DK, remove all jumpers of J4 firstly.
GND - Pin 2 of J4
SWCLK - Pin 27 of J4
SWDIO - J4的PIN 25
VPP - TP2 (J8 jumper open)
VBAT - Pin 1 of J5 (J5 jumper un-installed)
3.插入式USB到PC上电以加电DK和模块。
4.要验证您的设置，请转到Keil项目以编译您的来源，下载到DUT。
5. If ok, exit from Keil debugger.
6.启动SmartSnippets工具并在首页中选择JTAG和DA14580-01。
7. Select OTP header section, press the "Connect" key to see downloading of "jtag_programmer.bin" is successful or not.
8. Press "Read" icon to read the OTP header content.
9.如果没有问题，设置和连接已准备好用于OTP图像编程。
For the OTP programming procedure, you can refer to our application note for details.
To enable OTP programming, J8 jumper need to be installed to enable VPP 6.8V.
为了更好的BLE性能和更长的范围，建议调整16M Crystal并编程值并在OTP标题部分中启用此校准。
在调试阶段，建议在OTP标题部分中启用的JTAG功能留下后门以进行进一步调试工作。如有必要，可以在以后禁用。
Beware your application didn't disable the JTAG feature. Or the JTAG enabling bit has no function.
Hope this info is helpful.

Tue, 2015-12-29 17:33
DV.
Offline
Last seen:5 years 2 months ago
Joined:2015-10-09 17:13
Hi MT_Dialog,

Hi MT_Dialog,

谢谢你快速的回复。
The connection you have suggested is worked. Though I haven't tried for OTP programming yet.

Thanks,
DV.

Sat, 2016-01-16 10:57
DV.
Offline
Last seen:5 years 2 months ago
Joined:2015-10-09 17:13
嗨mt_dialog，

嗨mt_dialog，

正如我在我想在基于DA 14580的模块的OTP存储器上编写的，但我还没有尝试过。我知道我必须在代码中禁用/启用宏也可以编译它以用于OTP编程。如果您能够告诉我包括OTP编程的代码编程的确切步骤，因为我有限量的模块，请执行以下操作。目前，我在SDK 5中使用了Proximity Reporter示例项目，因此您可以在该示例中解释我。

Thanks,
DV.

Mon, 2016-01-18 16:48
MT_dialog
Offline
Last seen:3 months 3 days ago
Staff
Joined:2015-06-08 11:34
Hi DV,

Hi DV,

Please check the following post:

http://support.dialog-semiconductor.com/step-step-guidelines-programming....

http://support.dialog-semiconductor.com/document-programming-otp-da14580...

Also for the OTP programming please check AN-B-020.pdf file.

Thanks MT_dialog

Thu, 2016-01-21 18:17
DV.
Offline
Last seen:5 years 2 months ago
Joined:2015-10-09 17:13
嗨mt_dialog，

嗨mt_dialog，

I read the application note and also the help of SmartSnippets tool. After that I made necessary connections of the module to the Basic kit as mentioned in one your previous post. Please note, with these connections I am able to program the SRAM using Keil uVision5 and the module works fine. Now I have done following steps:

1. Start SmartSnippets v3.8
2.选择JTAG和DA14580-01
3. Go to OTP Programmer and select 'OTP Image' tab
4.浏览并选择要在OTP MEMORT上加载的十六进制文件，在这种情况下，使用'GPIO_DRV_PIN_ALLOC_MON_DISABLEABLEABLED构建的Proximity Reporter Project HEX文件定义。它显示“OTP映像”选项卡上的数据文件内容。
5. Connect to the device successfully.
6.读取OTP内存。
7. Burn the selected HEX file.

After the step 7 I got following error:

[info @ 16-01-21 00:01:21] OTP图片：在地址0x40000时，使用25036个字节的数据开始刻录内存。
[错误@ 16-01-21 00:01:22] OTP图像：地址0x81FEC（MSB第一）Adddition Error Info：FF FF FE
[错误@ 16-01-21 00:01:22] OTP图像：内存刻录失败。

此外，当我开始SmartSnippet时，我收到错误“在C：\ Windows \ System32中找不到FTD2xx.dll。

I have attached the ZIP file that contains SmartSnippets logs and the snapshot of the FTDI error.

请帮助我解决这些错误，以便我可以刻录OTP内存。

Thanks,
DV.

Attachment:
Package iconOTP programming error logs and snapshot.
Thu, 2016-01-21 17:03
MT_dialog
Offline
Last seen:3 months 3 days ago
Staff
Joined:2015-06-08 11:34
Hi DV,

Hi DV,

您收到的错误可能是此手机的根本原因，尝试使用最新版本的智能片段，此外可能是您OTP编程供应的问题。请确保与电路板的J-Link连接尽可能短，接地稳固。VPP必须清洁，不得超过6.8V。

Also please check the following posts.

http://support.dialog-semiconductor.com/otp-programming-1

http：//support.dialog-semicondiondiondum/otp-program-mass-production-vpp -...

http://support.dialog-semiconductor.com/vpp-current-consumption

Thanks MT_dialog

Thu, 2016-01-21 18:16
DV.
Offline
Last seen:5 years 2 months ago
Joined:2015-10-09 17:13
嗨mt_dialog，

嗨mt_dialog，

感谢您的快速回复。

误差现在已解决，我能够使用基本套件对基于DA14580模块的OTP存储器进行编程。我忘了在基本套件上安装j8连接器上的跳线！

But now, even after program the OTP Image and the OTP Header the module is not working independently. Why is that so? Is there anything wrong in the setup? Do I need to do something else to make it work? I have attached the OTP Image and OTP header programming logs for the reference.

I am using latest SmartSnippets i.e. v3.9. And I still getting that FTDI error. Please help me to resolve this error too.

Thanks,
DV.

Attachment:
Package iconOTP Programming success logs and OTP header file
Fri，2016-01-22 16:57
MT_dialog
Offline
Last seen:3 months 3 days ago
Staff
Joined:2015-06-08 11:34
Hi DV,

Hi DV,

Nice to hear you made it, i dont get the "the module is not working independently" what do you mean ? without power, only with the battery ? If that is the case did you change the jumper on j5 header in battery power supply ? As far as the OTP headers i ve noticed that you dont have your application flags programmed. Please check the AN-B-001 for the booting procedure of the 580 and the function of the application flags. About the FTDI error i guess this has something to do with your FTDI drivers installed in your system, try to update them.

Thanks MT_dialog

Fri, 2016-01-22 17:04
DV.
Offline
Last seen:5 years 2 months ago
Joined:2015-10-09 17:13
嗨mt_dialog，

嗨mt_dialog，

感谢您的快速回复。

By "the module is not working independently", I meant that till now I am loading the program, to the module through Basic Kit, using Keil uVision 5 and that was running fine. But after flashing the OTP memory I am expecting that, there is no need to load the program using Keil and it should work by just giving power, but that is not happening.

Regarding the connection, VBAT of module is connected to the Pin1 of J5 and GND of module is connected to the Pin2 of J4.

What should I program to Application Flags and can I change it now on the same module? Do I also need to program bool loader to OTP memory? If yes, where can I find it ?

Awaiting your reply.

Thanks,
DV.

Mon, 2016-01-25 17:17
MT_dialog
Offline
Last seen:3 months 3 days ago
Staff
Joined:2015-06-08 11:34
Hi DV,

Hi DV,

As the AN-B-001 indicates the bootloader checks if the application flags are programmed to YES then the bootrom boots from the OTP otherwise it follows the ordinary procedure as if it is unprogrammed, just connect your module and set your OTP application flags to yes. In the 580 there is a bootloader the secondary bootloader is used for alternative purposes (for more info please check the UM-B-012 : Creation of secondary bootloader).

Thanks MT_dialog

星期二，2016-01-26 12:29
DV.
Offline
Last seen:5 years 2 months ago
Joined:2015-10-09 17:13
嗨mt_dialog，

嗨mt_dialog，

Thanks for your reply.

I am not able to "Connect" to the module using SmartSnippets, it is giving me errors. I think that is due to the OTP is already programmed. It seems that the module is wasted, as now I am not even able to program the System RAM to run it in debug mode from Keil uVision 5.

每次您建议新的应用程序注意/用户手册。没有任何东西在初学者的一个地方覆盖，没有任何东西可以立即提供。我要求您请让我知道我需要遵循的确切步骤，以成功编程模块的OTP内存。

Thanks,
DV.

Tue, 2016-01-26 17:09
MT_dialog
Offline
Last seen:3 months 3 days ago
Staff
Joined:2015-06-08 11:34
Hi DV,

Hi DV,

如果您的OTP用Header_log.txt烧毁，那么您应该能够重新启动调试器并将您的OTP（不刻为刻录的字段）重新连接，因为应用程序标志未刻录，并且仍仍启用JTAG。它难以保留关于如何编程OTP，OTP的不同字段的信息，通过使用开发套件并在一个教程中进行故障排除OTP来连接参考设计，以便我们尝试将您重定向到相应的手册。

About programming the OTP i suppose that you are allready familiar in how to connect to the module with your development kit.

1) Choose the OTP Image tab

2) Choose your .hex file and burn you program to the OTP.

3) Go to the OTP Header tab and change both of your application flag fields to yes (Just to start your code executing from the OTP) i ve attached the OTP .hex from the ref design i ve just burned, for your reference.

之后，您的设备应在重置后进行宣传。您可以从附件中看到的，JTAG仍然启用，因此我能够在智能代码片段工具中的连接到OTP标题选项卡时立即重新连接到已全部刻录模块。

Thanks MT_dialog

Attachment:
Package iconBeacon_preliminary_header.zip
星期三，2016-02-03 01:36
DV.
Offline
Last seen:5 years 2 months ago
Joined:2015-10-09 17:13
嗨mt_dialog，

嗨mt_dialog，

如果它是不可能有一个教程,then at least there should be a document, may be an application note, that explains how to program OTP memory using SmartSnippets. That helps the beginners, like me, a lot. Anyway, thanks a lot for your help. I am able to program OTP memory and able to set those flags. Now my code executes and module works fine.

Regards,
DV.

星期三，2016-02-03 16:19
MT_dialog
Offline
Last seen:3 months 3 days ago
Staff
Joined:2015-06-08 11:34
Hi DV,

Hi DV,

Glad you could make it. I will forward your request to the team about having a fully document how to interact with the OTP.

Thanks MT_dialog

Topic locked