PLT问题- OTP IMAGE写入失败

我正在使用PLT(DA1458x/DA1468x生产线工具)刻录我的DA14585设备。

PLT版本为v_4.3.4 .0.310。

在最初的几天，我供应5.25v的“VDD 5V”，和3.3v的“VDDIO”和“VBAT”的PLT板。

跳线J42安装在PLT板上。(起初我不知道如果程序DA14585，这个跳线应该被删除)。

几天来，一切都很顺利，我已经为我的DA14585设备编写了几百个程序。

但是在这些天里，我尝试编程，PLT停止在“Code 271 OTP IMAGE WRITE FAILED”。

所以我移除了跳线J42在PLT板，但PLT仍然停止与相同的问题。

仍有一些设备等待被编程。

请问如何让PLT正常工作?

错误日志BPWA02_20201229_DUT_505730320ce7_FAILED.log如下:

软件:DA1458x/DA1468x生产线
软件版本:v_4.3.0.310
PLTD DLL版本:v_4.3.0.310
PDLL版本:v_4.3.0.310
UDLL版本:v_4.3.0.310
生产测试BLE固件版本:v_6.0.6.427
生产测试APP固件版本:v_6.0.6.427_PLT_v4.3
Flash程序员固件版本:v_6.0.6.427_PLT_v4.3
日期:2020-12-29
开始时间:15:03:44.244
结束时间:15:03:59.353
站ID: BPWA02
设备ID: 1
COM端口:31
DUT IC: DA14585
串行通讯端口:0
BD地址:50:57:30:32:0c: e7

| | | |
##########################################################################################################################
|15:03:45.712 |DUT_UDLL_FW_DOWNLOAD_INIT | STARTED |UDLL firmware download initialized。固件是= [D: \ PLT \ DA1458x_DA1468x_PLT_v_4.3.0.310 \二进制文件可执行文件\ \ prod_test_585.bin]。
|15:03:45.743 |DUT_UDLL_FW_DOWNLOAD_START | STARTED |UDLL firmware download STARTED OK。固件是= [D: \ PLT \ DA1458x_DA1468x_PLT_v_4.3.0.310 \二进制文件可执行文件\ \ prod_test_585.bin]。
|15:03:50.540 |DUT_UDLL_FW_DOWNLOAD_OK | PASS |UDLL固件下载OK。固件是= [D: \ PLT \ DA1458x_DA1468x_PLT_v_4.3.0.310 \二进制文件可执行文件\ \ prod_test_585.bin]。
|15:03:50.540 |DUT_UDLL_FW_DOWNLOAD_OK | PASS |UDLL固件下载OK。固件是= [D: \ PLT \ DA1458x_DA1468x_PLT_v_4.3.0.310 \二进制文件可执行文件\ \ prod_test_585.bin]。
|15:03:50.665 |DUT_PDLL_COM_PORT_INIT | STARTED |Device pdll COM port open initialized。
|15:03:50.665 |DUT_PDLL_COM_PORT_START | STARTED |Device pdll COM port open STARTED。
|15:03:50.681 |DUT_PDLL_COM_PORT_OK | PASS |Device pdll COM port opened OK。
|15:03:50.759 |DUT_PDLL_FW_VERSION_GET_START | STARTED |Device pdll Firmware version get STARTED . |15:03:50.759 |DUT_PDLL_FW_VERSION_GET_START | STARTED
|15:03:50.837 |DUT_PDLL_FW_VERSION_GET_OK | PASS |设备pdll固件版本获取OK。PDLL version=[v_4. 0.310]， BLE FW version=[v_6.0.6.427]， APP FW version=[v_6.0.6.427 _plt_v4.3]。
|15:03:50.837 |DUT_PDLL_XTAL_TRIM_INIT | STARTED |XTAL trim operation initialized。
|15:03:50.837 |DUT_PDLL_OTP_XTAL_TRIM_READ_INIT | STARTED |OTP XTAL trim read operation initialized。
|15:03:50.853 |DUT_PDLL_OTP_XTAL_TRIM_READ_START | STARTED |OTP XTAL trim read operation start。
|15:03:50.869 |DUT_PDLL_OTP_XTAL_TRIM_READ_OK | PASS |OTP XTAL trim read operation ended OK。OTP XTAL修剪值=[510]。
|15:03:50.869 |DUT_PDLL_XTAL_TRIM_START | STARTED |XTAL trim operation STARTED。
|15:03:53.228 |DUT_PDLL_XTAL_TRIM_OK | PASS |XTAL trim operation ended OK。
|15:03:53.290 |DUT_PDLL_UART_RESYNC_INIT | STARTED |UART resync process initialized。
|15:03:53.290 |DUT_PDLL_UART_RESYNC_START | STARTED |UART resync process STARTED . |15:03:53.290 |DUT_PDLL_UART_RESYNC_START | STARTED
|15:03:53.337 |DUT_PDLL_UART_RESYNC_OK | PASS |UART重同步进程OK。
|15:03:53.337 |DUT_PDLL_XTAL_TRIM_READ_INIT | STARTED |XTAL trim value read initialized。
|15:03:53.337 |DUT_PDLL_XTAL_TRIM_READ_START | STARTED |XTAL trim value read STARTED。
|15:03:53.368 |DUT_PDLL_XTAL_TRIM_READ_OK | PASS |XTAL trim value read OK。计算的新值=[474]。使用的OTP XTAL装饰值=[510]。
|15:03:55.868 |DUT_UDLL_FW_DOWNLOAD_INIT | STARTED |UDLL firmware download initialized。固件是= [D: \ PLT \ DA1458x_DA1468x_PLT_v_4.3.0.310 \二进制文件可执行文件\ \ flash_programmer_585.bin]。
|15:03:55.900 |DUT_UDLL_FW_DOWNLOAD_START | STARTED |UDLL firmware download STARTED OK。固件是= [D: \ PLT \ DA1458x_DA1468x_PLT_v_4.3.0.310 \二进制文件可执行文件\ \ flash_programmer_585.bin]。
|15:03:57.837 |DUT_UDLL_FW_DOWNLOAD_OK | PASS |UDLL固件下载OK。固件是= [D: \ PLT \ DA1458x_DA1468x_PLT_v_4.3.0.310 \二进制文件可执行文件\ \ flash_programmer_585.bin]。
|15:03:57.853 |DUT_UDLL_FW_DOWNLOAD_OK | PASS |UDLL固件下载OK。固件是= [D: \ PLT \ DA1458x_DA1468x_PLT_v_4.3.0.310 \二进制文件可执行文件\ \ flash_programmer_585.bin]。
|15:03:57.853 |DUT_UDLL_FW_VER_GET_INIT | STARTED |UDLL 'firmware version get' operation initialized。
|15:03:57.853 |DUT_UDLL_FW_VER_GET_STARTED | STARTED |UDLL 'firmware version get' operation STARTED。
|15:03:57.853 |DUT_UDLL_FW_VER_GET_OK | PASS |UDLL 'firmware version get' operation ended OK。UDLL version=[v_4. 0.310]， Firmware version=[v_6.0.6.427_PLT_v4.3]
|15:03:57.868 |DUT_UDLL_OTP_IMG_WR_INIT | STARTED |OTP镜像写入操作初始化。要写的映像是[D:\PLT\BPWA02_V1.3.bin]。
|15:03:57.868 |DUT_UDLL_OTP_IMG_WR_STARTED | STARTED |OTP镜像写操作启动。要写的映像是[D:\PLT\BPWA02_V1.3.bin]。
|15:03:58.759 |DUT_UDLL_ACTION_RESPONSE_ERROR | ERROR |UDLL设备响应错误。图像(D: \ PLT \ BPWA02_V1.3.bin)。当前设备状态=[183]。
|15:03:58.759 |DUT_UDLL_OTP_IMG_WR_FAILED | FAIL |OTP镜像写操作失败。图像(D: \ PLT \ BPWA02_V1.3.bin)。当前设备状态=[183]。