Hello
I used the SDT example to program 2 units SamrtBond Wireless Range USB development kits.
bringing them together does not produce any visible reaction.
Using the RaspBerry Pi Gateway solution does not bring any logging info neither.
Where am i going wrong??
Device:
Hi ghisbo,
Could you please check the user guide and make sure that you are following the correct steps?
http://lpccs-docs.dialog-semiconductor.com/wira_social_distancing_tag_example/user_guide.html
Please provide more inputs about the steps you have done, so that I can understand what might get wrong.
Thanks, PM_Dialog
Thank you for pointing me to the guide again. I missed the change of the jumper. see below text from the user guide.
"The behavior is described in details later, but the application assumes that the presence of the VBUS power supply means the SDT is in charge and should not perform ranging operations. In order to allow ranging on the USB-kit it is necessary to supply the DA14695 with VBAT and disconnect VBUS.
这可以通过光盘onnecting the jumper on J2 and connecting a jumper between pin 1 and pin 2. on J3"
It works now. Case closed
Hi ghisbo,
Glad that you figured your issue out. I you have any follw up question, please raise a new forum thread.
Thanks, PM_Dialog