How to get BD address from OTP ROM

⚠️
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at//www.xmece.com/support. We’ll be fixing bugs / optimising the searching and tagging over the coming days.
6 posts / 0 new
Last post
nigelyang
Offline
Last seen:1 month 3 weeks ago
Joined:2018-03-20 08:24
How to get BD address from OTP ROM

hi Dialog

if my code stored in QSPI flash, but I writed a BD address in OTP ROM by PLT, how to make ble stack use BD address in OTP ROM instead of the one in NVMS or defaultBLE_STATIC_ADDRESS? Moreover, how to read the BD address from OTP ROM? Is there any example code anout this case?

thanks

Nigel

Device:
PM_Dialog
Offline
Last seen:19 hours 33 min ago
Staff
Joined:2018-02-08 11:03
Hi Nigel,

Hi Nigel,

The BD Address in placed in specific address (0x07F8EA58) in the OPT header. Please try to read the OPT Header with the OTP tool from the SmartSnippets toolbox. In order to read the BD Address from the OTP Header you should follow the procedure below:

1. Add the LLD (low level drivers) of the OTP controller

#include "hw_otpc.h"

2. Add the function which reads from the OTP memory, named read_bd_address_from_otp(). The source code is below:

static bool read_bd_address_from_otp(uint32_t otp_cell_offset, uint8_t *bd_address, uint32_t *phy_otp_address) { uint32_t r_buf[2]; uint32_t num_words = 3; uint32_t *physical_otp_address; static uint8_t bd_address_otp_final[8]; bool is_correct = 0; physical_otp_address = hw_otpc_cell_to_mem(otp_cell_offset); phy_otp_address = physical_otp_address; hw_otpc_init(); is_correct = hw_otpc_fifo_read( (uint32_t *) r_buf, otp_cell_offset ,HW_OTPC_WORD_LOW, num_words, false ); hw_otpc_disable(); bd_address_otp_final[0] = (r_buf[0] >> 0 ); bd_address_otp_final[1] = (r_buf[0] >> 8 ); bd_address_otp_final[2] = (r_buf[0] >> 16 ); bd_address_otp_final[3] = (r_buf[0] >> 24 ); bd_address_otp_final[4] = (r_buf[1] >> 0 ); bd_address_otp_final[5] = (r_buf[1] >> 8 ); bd_address_otp_final[6] = (r_buf[1] >> 16 ); bd_address_otp_final[7] = (r_buf[1] >> 24 ); memcpy(bd_address, bd_address_otp_final, 8); return is_correct; }

3. Retrieve the BD address from the OTP memory

uint32_t * physical_otp_memory_cell;uint32_t cell_offset = 0x1D4B; static uint8_t bd_address_final[8]; bool read_success; /* Retrieve the BD address from the OTP memory */ read_success = read_bd_address_from_otp(cell_offset, bd_address_final, physical_otp_memory_cell); OS_ASSERT(read_success); static own_address_t user_bd_address = { .addr_type = PRIVATE_STATIC_ADDRESS, }; memcpy(user_bd_address.addr, bd_address_final, 6); // Set BD address to the preffered value. This function sets the BD address in inverse order. ble_gap_address_set(&user_bd_address, 0x00FF);

Thanks, PM_Dialog

nigelyang
Offline
Last seen:1 month 3 weeks ago
Joined:2018-03-20 08:24
hi Dialog,

hi Dialog,

我的测试基于您的功能似乎不适用于DA14681。你能告诉我为什么“cell_offset”是0x1d4b?什么是与0x07f8ea58的关系(OTP中的BD地址)?我很奇怪“physical_otp_address = hw_otpc_cell_to_mem(otp_cell_offset)”,但是,hw_otpc_cell_to_mem()中的photical_otp_address = 0x7f80000 +(cell_offset << 3)。它不会是0x07f8ea58。

thanks

Nigel

PM_Dialog
Offline
Last seen:19 hours 33 min ago
Staff
Joined:2018-02-08 11:03
Hi nigelyang,

Hi nigelyang,

param [in] otp_cell_offset :The offset of the OTP cell. The formula to calculate the physical memory address is (0x7F80000 + (otp_cell_offset << 3)). E.g. the offset 0x1D4B corresponds to 0x7F8EA58 physical address (location of the BD address)

param [in] bd_address : The cell's contents in chunks of 1 byte

param [in] phy_otp_address : The physical address of the OTP memory cell (for verification purposes)

param [out] : True if the read request has been successfully performed, false otherwise

As I mentioned in my precious answer, the BD Address in placed in specific address (0x07F8EA58) in the OPT header. Did you read the OPT Header with the OTP tool from the SmartSnippets toolbox. Is the BD Address located into 0x07F8EA58? Otherwise, in which OTP address is located?

Thanks, PM_Dialog

nigelyang
Offline
Last seen:1 month 3 weeks ago
Joined:2018-03-20 08:24
Hi Dialog,

Hi Dialog,

I found my problem comes from using cm_sys_clk_set(sysclk_PLL48) for systme clock setting. I got the correct BD address of OTP after changing by cm_sys_clk_set(sysclk_XTAL16M); One more question, what is correct way to read OTP BD address if using cm_sys_clk_set(sysclk_PLL48) ?

thanks

PM_Dialog
Offline
Last seen:19 hours 33 min ago
Staff
Joined:2018-02-08 11:03
Hi nigelyang,

Hi nigelyang,

Yes, you should read the BD Address with the same way. If you change the clock to PLL are you able to access the OPT Header from the toolbox and read the contains? If you found the previous answers useful please mark one of them as “accepted”.

Thanks, PM_Dialog