Hello,
I am using the DA9053 to power an imx6SLL from NXP.
As the DA9053 is not yet configured to power the iMX6, I need to prgram it before power up the iMX6.
How can I program the DA9053?
Thanks
问候,
Damien
Device:
⚠️
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at//www.xmece.com/support. We’ll be fixing bugs / optimising the searching and tagging over the coming days.
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at//www.xmece.com/support. We’ll be fixing bugs / optimising the searching and tagging over the coming days.
你好,达米安,
Do you have -00 parts? Do you have a sockted eval board?
kind regards,
Elliott Dexter
Hello Elliot,
We have DA9053-00C51 soldered on a board and we would like to program the firmware inside it for a iMX6SLL.
How we can do it if we don't have an EVK?
问候,
Damien
你好,达米安,
These parts cannot be programmed in system unfortunately. Our socketed eval board allows one part to be programmed at a time for initial testing and prototyping. However, for production a standard variant would have to be used or a custom variant would have to be generated.
At this moment in time we do not have a standard variant for the DA9053 and the i.MX6SLL.
Kind regards,
Elliott
Elliot,
How can I have a socketed eval board?
问候
你好,达米安,
They can be obtained through Avnet. We have two different versions for the two different packages.
Kind regards,
Elliott