hello dialog_support，
I am working on project, where my device uses DA14583 MCU and software is designed such that using BLE command it's turn On/Off the LED's.
But my hardware is powered using Chargerable LiPo battery, whenever battery low i can recharge the battery for this i need to give an indication to user.
To monitor the battery level i need a provison in my software where i could check the battery level using timer.
我已将电池驱动程序库称为示例，但我只能看到读取硬币单元和AAA电池电量的规定。
那么您是否有任何图书馆可供您阅读Lipo电池电量？如果是，请分享我将使用的库。
if Not, then can you help me how to build a library for LiPo battery?
Thanks in advance
Rohit Rajapure
Device:
Hi Rajapurerohit,
如果您使用Lipo直接到DA14583以便为推动它可以让我知道吗？如果是，您如何激发DA14583？你使用的是哪个脂肪？请注意DA14583最多可支持3.3V。如果Lipo充满电，电压电平超过3.3V吗？我想了解如何做电力预算以及如何向DA14583提供电源。另外，您使用的DCDC转换器的模式？降压或升压模式？
谢谢，PM_DIALOG.
helli pm_dialog，
If you are using the LiPo directly to DA14583 in order to power it up?
* No. NCP114,3.0V 300 MA CMOS低压丢失调节器，用于调节电池的电压（附带数据表）
*Enable pin of the LDO is connected to IN permanently
你使用的是哪个脂肪？请注意DA14583最多可支持3.3V
如果Lipo充满电，电压电平超过3.3V吗？
*Off the shelf available batteries are used
How you are doing power budget?
*No specific strategy
How you are supplying power to DA14583
* NCP114如上所述用于将VCC调节至3.0V
您正在使用的DCDC转换器的哪种模式？降压或升压模式？
* NCP114支持操作输入电压范围：1.7 V至5.5 V和输出固定3.0V（降压 - 升压？）
使用的电池充电器是MCP73831，微型单电池，全集成的Li-Ion，Li-Polymet Charge Management控制器，来自Microchip（附带的数据表）
Second project:-
And, also my other product using AAA 2 batteries to power up the system. To monitor the battery level I used the inbuilt library Bat_lvl(); and called the function to read AAA. But I always receive the 147% level. So I am not understanding it is in terms of voltage or level? Could you please help me with this also. How do I calibrate in terms of monitor battery levels from 0% to 100%?
Thanks and Regards
Rohit Rajapure
Hi Rajapurerohit,
在我之前的评论中只是一个纠正，DA14583仅以降压模式运行。DA145583不能像DA14580那样以升压模式运行。让我检查你的意见，我会尽快回复你。
谢谢，PM_DIALOG.
Hi PM_Dialog,
Is there any update on this ?
It's urgent for me to solve this please help me as early as possible.
Thanks and Regards
Rohit
Hi Rajapurerohit,
Regarding you issue with the LiPo battery, I don’t have any news until now, but I have asked internally if there is anything available. Regarding you second project, are you using 2 AAA batteries in order to power up the device? If you are running the batt_lvl example of the SDK, did you changed the arguments of the battery_get_lvl() to BATT_AAA?
谢谢，PM_DIALOG.
Hi PM_Dialog,
感谢您的反馈，
Yes, as I already mentioned in the previous post that I am using 2 AAA batteries to power up the device and also using the Battl_lvl() function with AAA to read the level.
所以请让我知道为什么它总是给我147％，或者在电压方面是它。如果它在百分比方面，那么如何使用此校准0到100％的级别？
Thanks and Regards
Rohit
Hi Rajapurerohit,
您可以尝试在Battery_Get_LVL（）函数中记录ADC_Sample值吗？连接2 AAA电池时是串联的，设备处于降压模式。
谢谢，PM_DIALOG.
Hi PM_Dialog,
I am receiving a value 147 %.
Lipo图书馆有什么更新吗？
Thanks and Regards
Rohit
你好，
Any update on both project issue?
It is really urgent for me to solve please help.
Thanks and Regards
Rohit
嗨rohit，
关于Lipo电池，我在内部检查，并没有任何软件来监控电池电量。请记住，不建议使用具有DA1458x产品的Lipo电池。亚博电竞菠菜为此，如果您仍然想要使用Lipo电池，您应该拥有自己的计算。关于连接到序列的2 x AAA电池，是否可以在调试模式下运行SDK的ADC示例，添加一个断点ADC_GET_VBAT_SAMPLE（）并让我知道这个函数返回了什么？
谢谢，PM_DIALOG.
Hi PM_Dialog,
谢谢您的答复，
you have mentioned, " Keep in mind that is not recommend to use LiPo battery with DA1458x products " - May I know why it(LiPo battery) is not recommended. Is there any document that mentioned regarding the same?
Thanks and Regards
Rohit
你好，
我在调试模式下检查了设备，
有以下功能，
1）ADC_GET_VBAT_SAMPLE（）
2）Battery_Get_LVL（BATT_AAA）
附加是样本和BAT_VAL的值的图像。
我请请求你请分享点你的gently. It's very urgent.
Thanks in advance
Rohit
Hi PM_Dialog,
Very Urgent to solve.,
You have mentioned that Use of LiPo battery with DA1458x product is not recommended.
Can you please tell me why it is not recommended? Does it affect functionality-wise to the controller or any other effects on DA1458x products?
The thing is we have already used the battery and our product is under the production phase, So please share why LiPo is not recommended and it affects on DA1458x.
Thanks in advance
Rohit
Hi Rajapurerohit,
让我清除这些东西。您可以使用DA1458x产品系列的Lipo电池，但您应该确保提供电压根据数据表规格。DA1468X / DA1469X产品旨在使亚博电竞菠菜用可充电电池运行，但由于您使用的电池在电压规格内，您也可以使用DA14583。如果您想获取Lipo电池电量，您应该继续使用自己的实现，因为SDK的ADC示例不支持。为此，如果您注意到芯片的电压规范，Lipo将不会影响任何影响。2.关于DA14583数据表，电池电源电压（VBAT3V）应在2.35V和3.3V之间，这是建议的操作条件。如果Lipo总是在限制范围内，那么就没有问题来使用它。此外，根据DA14583数据表再次，VBAT的最大电压限值为3.6伏，因此强烈建议不要提供超过3.6伏的电压的芯片。关于您在行中连接的2 x AA发出问题，ADC示例支持该条件。所以，在为DA14583供电时，您是否总是获得这些结果？
谢谢，PM_DIALOG.