源code of the "smartbond IoT sensors" app (for Android

Hi Jean-Paul, yes, it is available. I'll send you a message with an SLA to accept prior to release of source code. BR JE_Dialog

是的，我非常希望得到智能绑定应用程序的源代码。我需要iOS和Android。

PS - I have noticed that the evothings demo app has a strange behavior when using sensor fusion - the quaternions drift when the unit is at rest. However, I was happy to see that with the right calibration settings, the image in the smart bond app is stable when the unit is stationary, so there must be something in the smart bond sf interface which is different from the evothings interface. I will let you know if I find out the difference, unless you happen to know what it is.

Hi userzweig,

A mail is send to the registered email address.

Regarding the drift in the sensor fusion application and the evothings application, i am not that familiar with the evothings demo but the sensor fusion values are calculated on the 583 and the applications are just parsing and presenting the data on the phone, if you are observing this kind of drift something should be different with the calibration settings, also as far as i know, from dialog's application you can perform an accelerometer calibration, i am not sure that you can do the same on the evothings application.

Thanks MT_dialog

Hi MT_dialog,

I would also very much like to have the source code for the Android app.

谢谢，
u1zeb

Hi u1zeb,

You will have to get your SDK access granted before i can sent you any source code. Please go to product DA14580 and navigate to software and tools. There you 'll see a padlock icon - click that, accept the agreement, and you will be granted will SDK access in a couple of days. After that i will be able to send you the SLA and the IoT source code.

Thanks MT_dialog

Hi u1zeb,

只要在发生这种情况下，您将不得不等待几天，直到您的SDK访问获得邮件，您应该收到一封邮件，请恰好发生，让我知道才能向您发送源代码。

Thanks MT_dialog

Hi u1zeb,

A mail has been sent to the registered email address.

Thanks MT_dialog

Hi MT_dialog,
I would also very much like to have the source code for the Android app.
谢谢，

Steen Hsu

I would like to have the source code for the Android App, thank you!

Hi, Could I get access to the source code of the IoT Sensors Android and iOS applications that connects to the device DA14583, pls.?

Thanks!

Hi meeralaxmi

Could you please clarify if you tried to download the IoT Sensors Android and iOS applications and you were unable to download them? As MT_Dialog mentioned in the previous thread, please have a look at the 583 product, under Software and Tools at the Mobile section, there you should be able to find the source code of the IoT sensor kit.

谢谢，PM_Dialog

Hi meeralaxmi,

Glad that you are able to download the mobile applications.

谢谢，PM_Dialog