Hi Dialog,
我按照AN-B-007（DA1458X蓝牙直接测试模式）文档中的过程，执行DA14585以测试模式，
This procedure need the tool "Connection Manager ",
但我无法在对话框网站中找到此工具，
你能告诉我哪里可以下载这个工具吗？
谢谢！！
设备：
⚠️
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at//www.xmece.com/support. We’ll be fixing bugs / optimising the searching and tagging over the coming days.
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at//www.xmece.com/support. We’ll be fixing bugs / optimising the searching and tagging over the coming days.
Hi yeh928,
我想你有最新的智能代码段工具箱，你在工具部分中拥有的选项之一是rf master，具有该工具，您将能够执行设备的RF测试。Connection Manager工具是一个单独的软件版本中的580工具的旧版本。
谢谢MT_dialog
Hi Dialog,
感谢您的回复，
After browsing the documents page of DA14585, only have the "AN-B-007 DA1458x Bluetooth Direct Test Mode V1.2 (02/04/2017)" can be found!
But, this document only can find using the "Connect manager" test proceeded, not an "RF Master"!
Has any other document used the "RF Master" to perform the DTM Mode on the DA14585?
We need to perform the RF PHY test use DA14585,
谢谢！
Hi yeh928,
用于执行测试的Connection Manager软件被智能代码段Toolbox中的RF Master替换，您在这些工具之间的选项是相同的，您还可以找到RF Master工具的信息在智能代码段的用户手册中（检查SST中的帮助菜单）。请按照以下步骤执行测试：
谢谢MT_dialog
Hi Dialog,
我使用RF Master并从SDK6.0.4封装下载到DA14580DEVKT + DA14585（以下称为DA14585 DEV板）（路径：DA14585_SDK \ 6.0.4.326 \ Binaries \ DA14585 \ Prod_test）下载“prod_test_585.hex”
在六角文件下载成功之后，可以将某些命令发送到DA14585 DEV板
(EX: LE Tx/Rx, Reset) and can watch some log list in the log window.
（请参阅附件中的“RF-Master Log”）
但是，我需要发送“HCI命令”并将“HCI事件”直接获取到DA14585 DEV板（例如：RESET命令=> 01 03 0C 00）。
I tried sending the HCI Command by using the serial application "Serial Port Utility" to connect the COM Port directly on the DA14585 dev board. (In the System, it detects the two COM Port, use the baud rate 115200 to connect), I tried any one, but DA14585 dev board is response such as abnormal. (not standard HCI event)
（请在附加文件中引用“send_response.txt”）
您能否请帮助我如何通过Dev Lobs上的串行端口（COM端口）直接发送HCI命令？
谢谢！
Hi Dialog,
I tried the both version of SDK (6.0.4.326 and 6.0.2.243) via "RF Master"
(Download the prod_test_585.hex and try some HCI Commands)
HCI事件在“RF Master”中发送HCI命令或将HCI发送到串行端口直接VI“串行端口实用程序”后，HCI事件在当前版本（Ver 6.0.4.326）中不正确或响应错误。
(Please refer the attach file da14585_log_compare.zip)
你能帮我解决这个问题吗？
(I need to perform the 2M signal on the DA14585, but old SDK version is not support 2M signal.)
谢谢！
Hi yeh928,
prod_test工具不支持BLE规范上可用的所有HCI命令，但是“RF Master”工具使用的某些命令，以便执行一些基本测试，以便使用HCI命令请下载HCI项目585 \ da14585_sdk \ 6.0.4.326 \ projects \ target_apps \ hci \ hci，请使用流量控制线。此外，我不明白你的意思是“我需要执行2M信号”。
谢谢MT_dialog
Hi Dialog,
I know the prod test tool is not support all of the HCI Command and only available on the BLE spec,
但是“HCI_RESET”HCI命令必须支持蓝牙核心规范5.0中的所有蓝牙设备定义
（请参阅蓝牙规范版本5.0 | Vol 2，Part E，第7.3.2节重置命令，第904页）
RF主站有“重置”按钮可以将HCI_RESET命令发送到DA14585 DEV板。
I verify the two version of SDK, The prod_test_585.hex in the current version(6.0.4.326) SDK may not work properly.
在以前的版本（6.0.2.243）的SDK，它可以正常工作，
（请在两个版本的附加文件中引用屏幕捕获。“rf-master_reset.zip”）
In this version of SDK(6.0.4.326), it CANNOT respond properly of HCI event.
Could you please help me to check this version(6.0.4.326) of "prod test tool" has any problem?
Or, Just the "prod_test_585.hex" at version(6.0.4.326) in package is damage?
Could you please provide a normally "prod_test_585.hex" to me?
谢谢！
Hi yeh928,
好的，现在我得到它，错过了你对先前的附件的评论，你用不同的SDK尝试。因此，6.0.4 SDK仅适用于新的585芯片，并且这些示例都无法在较旧的585芯片上正确执行，即为什么您没有在新SDK上获得HCI命令的正确响应。
谢谢MT_dialog
Hi Dialog,
根据对话网站，
如果我不能找到一个新的585licon publish on the website
I had bought this DA14585 Dev board last week.
== <请将DA14585 PCB称为捕获作为附加文件。> ==.
芯片上的印刷单词是（DA14585 AB000 1703NCAB）
板在板后侧的标签（DA14585-01ATDB-P 1711_00076）
Could you please help me to check this DA14585 is new or older 585 silicon,
如果这是较旧的，请帮助如何获得新版本的585芯片。
或者，如果这是当前版本。
请向我提供通常的“prod_test_585.hex”？
谢谢
Hi yeh928,
Yes, its an older silicon, the SoC indicates the version of the chip as AB and that is an older silicon, it should indicate AC or 00 in versions that run with the 6.0.4. Now normally you should not have this kind of SoC version, so did you purcahse that daugherboard or an FAE provided that (if an FAE provided that, you should come in contact with him in order to change that daughter board) ? At the moment all the daughter boards at the market should be the updated version.
谢谢MT_dialog
Hi Dialog,
Due to us having re-work the DA14585 daughter board
（我们在董事会上添加了SMA连接器）
而且，我通过海外航运从Mouser购买了这款DA14585开发Kit-Pro（DA14585-00ATDEVKT-P）。
Now, I had a motherboard, and DA14585 daughter board with older silicon,
因此，我们计划仅重新订购DA14585子板（新芯片），
你能帮帮我查看以下项目：
1. How do check the DA14585 daughter board has on-board the "New silicon or not" listed on the online store?
2.只在在线商店购买DA14585女儿板（新硅）？什么是型号名称？
(The Dialog only provides the "DA14585 Development Kit-Pro" link)
3.每个版本的SDK更新，旧版本设备（旧硅，“在这种情况下）始终丢弃？
I very worried after ordering a new DA14585 daughter board, the next version of SDK has dropped this version silicon.
感谢您的支持和回复！
hi Yeh928, we will arrange for a swap-out for a new daughter card for you, free of charge. We can confirm that final production version Silicon (now fully released) had a minor metal change compared to the version on this daugther card you have. I will have someone from local Dialog team in Taiwan reach out and arrange this with you. BR JE_DIalog
Hi Dialog,
我是否需要准备一些联系信息到台湾对话框？
我下次要做什么？
Thank you for your help.
Hi Dialog,
到目前为止，我还没有收到对话框台团队的任何信息，
你能帮我检查一下吗？
谢谢！
Hi yeh928,
Just pinged them, let me know if they contact you in the following days.
谢谢MT_dialog
Hi Dialog
I received DA14585 BOARD from another company.
哪种JTAG工具应用于软件更新操作？
Thank you for your response
Hi moonjg,
请不要在无关线程上发布问题，您可以始终创建一个新的线程来发布您的问题。
Regarding your issue i dont quite get the question, what exactly do you mean ? The JTAG that Dialog uses and recommends is the ARM Jlink Lite, if you have a dev kit then the JTAG is attached on the development kit.
谢谢MT_dialog