Hi,
From Figure 9: Power management unit block diagram, it looks like the V33 source is LDO.
What will be the voltage at V33 pin when the battery voltage at Vbat1 is less than 3.3V?
If, for example, the battery is non rechargeable lithium battery, the voltage of the battery can drop below 3.3V.
It looks like the Vbat1 is suitable only for rechargeable lithium battery (3.4-4.2V).
What is the dropout voltage of the 3.3 LDO's?
Thanks,
Itsik
Device:
Hi itsikb,
如果你提供低于3.3 v your output will be about the voltage that you provide to the VBAT1 -100mV to -150mV. This is the drop voltage of the LDO's.
Thanks MT_dialog