连接经理

嗨Zeina，不幸的是，我们只有一个版本的连接经理现在可用。

BR JE_Dialog

你好,

about this theme, I am testing the DA14580 board with the proximity report application and the Connection Manager(using BTLE/USB Dongle). At the first I connect the USB Dongle and start the Connection Manager, then its detected the J-Link CDC UART in the Connection Manager and the verification and script proccess are succesfullly. Then I select "Boot as Central" to conect with DA14580, I scan the devices but in the Address list there are any Address(device) to establish Link. That it ocurred with the version 2.0.4 und I have seen a newer version in the Webpage (3.0.4) then I have installed und I done the same process. Now when I select "Boot as Central" the software doesn't do anything, therefore , It shows any Tab to scan devices.
Then I would like know, if that is an error or I am doing some bad?

谢谢

Jvp

@ zmakki9:

yes, you can.
连接经理should be started in Central mode, and in the window you then can see the packets received, e.g. when pressing a key.

最好的问候，bb_dialog，

Dialog BLE Support Team.

@ DesignExt,

在Connection Manager中，您应该从/ bin / firmware_upload /文件夹（加载固件）加载文件'full_emb.hex'。

Choose the lowest Com port number of the UART com port pair. 'Flow Control' set to 'None'.

加载SW后，并按下“启动作为中央”，左窗格应显示选项和设置。连接间隔等

最好的问候，bb_dialog，Dialog BLE Support Team.

你好bb_dialog，

谢谢您的回答。我做了相同的事情。在以前的版本（2.0.4）在加载SW和按下“启动作为中央”后，在左侧面板中显示了扫描的所有选项。但在更新到版本3.0.4之后，我已将SW，SetFlow控件加载到None，然后按“启动作为控制”，但我收到任何Anwswer und左侧面板在开头（Ohne选项Connections）相同。

best regards,

Jvp

Hello DesignExt,

I'm sorry to hear it's not working for you.

Did you try another USB port - preferably one directly at your PC, not via an external hub?
Did you try to unplug and plug in again?

如果这不成功，我会将您的问题转发给工具开发团队。

最好的问候，bb_dialog，Dlalog BLE Support Team

Hello CristiPop,

I don't know. This was not fed back to us.
In general when facing this issue, following things mostly solved the Conn.Manager issues:

- 尝试其他USB端口（例如非USB3端口）。

- 选择正确的UART COM端口（UART对中的较低数字）。

- set Hardware Flow control to 'None'.

- take care to use the right GPIO's of the DA14580. On our eval.kits and in the SDK these are defined to P0_4 and P0_5.

Best regrds, BB_Dialog.

I've got the EVAL_PAN1740 Development kit with a couple USB dongles with the DA14580 on them.
I seem to be having a related problem. I'm using Connection Manager 3.0.6. Here's the startup text, which is also what happens when I try to "Load Firmware...":

Hex2bin v1.0.10，版权所有（c）2012 jacques Pelletier＆贡献者
Lowest address = 00000000
Highest address = 000034E7
Pad Byte = FF
8-bit Checksum = 30

工具目录：C：\ Program Files（X86）\ ConnectionManager \ Bin \ Firmware_Upload \
Using HEX file: "C:\Program Files (x86)\ConnectionManager\bin\firmware_upload" "full_emb.hex"

--- Generated JLink Script File ---

SEGGER J-Link Commander V4.72 ('?' for help)
Compiled Jun 12 2013 15:47:30
未知命令行选项loadbin.txt。

Okay, so do I have an incompatible J-Link Commander version? When I try to "Boot as Central", nothing happens, presumably because no firmware is loaded.

I can download and debug code using Keil, and I have some limited success using SmartSnippets, but the Connection Manager has been a problem.

Hi dsuilmann,

sorry for late answer.
可以在您的Firmware_Upload文件夹中缺少Hex2bin.exe程序吗？
Or old version?
The recent version is dated 26-09-2014 (14:22 Hrs) and size is 54.2 KB.
The JLINK.exe has the same date.

The loadbin.txt file should contain the following or similar:

r
w2 50000012, A6
W2 50003308, 2e
loadbin "full_emb.bin", 0
verifybin "full_emb.bin", 0
r
g
exit

Following should be be written in the Log window:

--- Generated JLink Script File ---
r
w2 50000012, A6
W2 50003308, 2e
loadbin "full_emb.bin", 0
verifybin "full_emb.bin", 0
r
g
exit
---
SEGGER J-Link Commander V4.72 ('?' for help)
Compiled Jun 12 2013 15:47:30
脚本文件已成功读取。
DLL版v4.72，编译6月12日2013 15:47:08
Firmware: J-Link ARM Lite V8 compiled Jul 8 2013 18:37:55
硬件：V8.00.
etc.

Best regards, BB_Dialog

谢谢! That was it... the firmware_upload folder had no loadbin.txt for some reason. It was in a path under "my documents".

Hello,
Is there a Connection_manager exe file for WIndows-64bit ---Windows-7?

谢谢
asm

Hi There, we only have the 32 bit, but it runs just fine on Windows 7 (64 bit). Windows i believe has built in emulator (seamless) which enables 32 apps to run on 64 platforms.

BR JE_Dialog