Skip to main content

IW632.

用于Qualcomm®QuepTONT™2.0和分频器模式的专用充电端口控制器

Not Recommended for New Designs.

iw632_application_circuit.

RapidCharge™ Dedicated Charging Port Controller

The iW632 is a RapidCharge™ Dedicated Charging Port (DCP) controller for Qualcomm®快速Chargetm 2.0(QC2.0)技术,可选的三星自适应快速充电(AFC)和分频器模式USB接口。它允许快速充电QC2.0或分频器模式的移动设备(MDS),它会自动识别QC2.0,AFC和分频器模式协议。IW632驻留在电源适配器的USB端口上,并允许适配器配置为5V,9V或12V的多电平输出,具体取决于MD所要求的电压。

It can be used in DC/DC power converter systems to achieve smooth voltage transition and low no-load power consumption. The iW632 implements three output pins for output feedback ratio change, output over-voltage, and fault and reset signals. In addition, iW632 also implements proprietary D+/D- over-voltage protection (OVP) and proprietary D- impedance detection to address soft short issues in the output cables and connectors that can be caused by such things as a poor or loose connection between the cable connector and the socket, contamination in the USB connector, or a worn-out cable, and provides protection against the damages.

特征

支持Qualcomm.®QC2.0高压专用充电端口(HVDCP)A类,电压配置为5V,9V和12V

支持s divider mode with D+/D- at 2.7V/2.0V for 2.1A rapid charging

可选择支持三星自适应快速充电(AFC),用于输出电压和电流协商

Backward compatible with USB Battery Charging Specification Revision 1.2 (USB BC1.2) DCP

Backward compatible with Chinese Telecom Standard YD/T 1591-2009 Shorted Mode

Automatically differentiates MDs and determines rapid charging protocols

专有的D + / D-OVP和专有的D次阻抗检测输出电缆和连接器中的软短问题,并提供防止损坏

可编程主动快速放电,在MD拔下电源插块或从高电压电平,在内置开关或外部交换机请求时从高电压电平到较低级别

通常在5V稳态操作期间具有<120μA截止电流的状态,以实现无负载的超低功耗

Wide operating voltage range from 3V to 25V

亚博国际官网平台网址

用于智能手机,平板电脑和其他移动设备的DC / DC转换器/充电器

要订购我们任何产品的样本,请填写以下表格。亚博电竞菠菜我们将免费提供多达五部。我们的销售部门将为样品订单提供超过五个部分的定价。

样本请求表格

保持联系

通过我们的全球销售办事处直接与我们联系,或联系我们的全球经销商和代表之一。

询问 经销商和代表 注册新闻通讯
产品简介和摘要
Name 日期 版本
IW632产品摘要(594.01 KB) 23/11/2018 1.2
数据表
Name 日期 版本
IW632.数据表(827.32 kB) (Registered users only) 23/11/2018 1.2
Reference designs
Name 日期 版本
Reference Design EBC10102: iW632-00, 18W, 3.0V-4.2V VIN, 5V/9V/12V VOUT Rapid Charge Power Bank Design(1.95 MB) (Registered users only) 21/04/2017 1.0
参考设计EBC10103:IW632-00 18W,12V-24VDC输入电压,5V2.4A / 9V2A / 12V1.5A汽车快速充电设计(2.13 MB) (Registered users only) 21/04/2017 1.0
General
Name 日期 版本
认证:Qualcomm HVDCP接口规范修订版AG(104.96 KB)