Skip to main content

PV88080

High Efficiency Advanced Feature 4-Channel PMIC

pv88080_block_diagram.jpg

High-voltage buck controller

The PV88080 provides one PWM buck controller and three adjustable synchronous buck regulators. The high voltage buck controller can optionally be used to generate the supply for the other three buck converters. Two pass devices (NMOS FET) for the high side and low side of the high voltage buck controller are external which allows the majority of the buck controller power dissipation to be outside the PV88080. This high voltage buck controller uses a constant on time (COT) control scheme with integrated bootstrap PMOS switch.

In certain applications, multiple PV88080s can be used together to provide enough power rails to power the larger systems. There are three buck converters that can be used to generate the supplies for CPUs, DDR memory and other Auxiliary functions in a typical application. The pass devices of these buck converters are fully integrated, so no external FETs or Schottky diodes are needed. This results in optimized power efficiency and a reduced external component count.

Features

One high-voltage synchronous buck controller with:

  • Wide VINrange, 7 V to 26 V
  • Programmable VOUT(0.8 V to 5.25 V when VIN< 13.2 V, 1.8 V to 5.25 V when VIN> 13.2 V)
  • Up to 20 A IOUTdepending on external MOSFET

Three synchronous buck converters with integrated low RONFET:

  • Buck1: programmable VOUT从0.75 V至3.3 V和5控制inuous output current, and 6 A peak current standalone
  • Buck2: programmable VOUTfrom 0.9 V to 3.6 V with 2 A continuous output current and 3 A peak current standalone
  • Buck3: programmable VOUTfrom 0.9 V to 3.6 V with 2 A continuous output current and 3 A peak current standalone

DVC on buck controller and buck converters

Auto mode on all buck converters, adjustable soft-start, and I2C-compatible interface

GPIO to connect/control the other device

Register-selectable multiple function: mute, reset timer, external thermal sense, and lower input voltage alarm

-40 °C to +85 °C ambient temperature

Benefits

50% reduction in board area

High integration of rails in single package

Re-programmability = fast re-design

Slew rate control improved PCB cost/performance

DVS for enhanced performance/power scaling

Significantly fewer devices & discretes

亚博国际官网平台网址

Networking home terminal

WiFi EAP/routers

Supply for digital television processor

Power supply for digital set top box (STB)

Package

32-pin QFN

Stay connected

Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.

Inquiries Distributors and Representatives Register for newsletters
Product Briefs and Summaries
Name Date Version
PV88080Product Brief(426.62 KB)
Datasheets
Name Date Version
PV88080Datasheet(3.22 MB)
Application notes
Name Date Version
AN-PV-001 Power Sub-System Design Using the PV88080(312.98 KB)
AN-PV-002 Power Fail Detection and Audio Muting Using the PV88080(529.9 KB)
AN-PV-003 Temperature Sensing Using the PV88080(586.15 KB)
AN-PV-004 Dynamically Changing the Output PV88080 Voltage(745.76 KB)
AN-PV-005 Voltage Rail Sequencing(873.02 KB) 23/07/2017 1.0
AN-PV-006 Dynamic Voltage Control(696.26 KB) 17/08/2017 1.0
Shared IRQ Line Considerations AN-PM-059(329.06 KB) 24/06/2016 1.2
Schematics
Name Date Version
PV88080Demo Kit Schematic(85.6 KB)
PV88080Evaluation Board(91.36 KB)
Software Resources
Name Date Version
PV88080GUI and documentation(54.19 MB) (Registered users only) 16/08/2020 5.7