HV PAK™ Programmable Mixed-signal Matrix with Four Outputs with Operating Voltage up to 13.2V and up to 2A Current per Output
The SLG47105 combines mixed-signal logic and high-voltage H-bridge functionality in a tiny 2 x 3 mm QFN package. One time programmable (OTP) Non-Volatile Memory (NVM) stores user-defined solutions in the form of interconnections of internal logic, I/O pins, and macrocells.
Integrated dual H-Bridge/quad Half-Bridge functionality allows driving different loads up to 2A per output with up to 13.2V voltage. The SLG47105 advanced PWM macrocells provide the ability to drive multiple motors with different PWM frequencies and duty cycles. Low idle current consumption in combination with a compact size further extends the field of possible applications.
这个高度通用的设备允许多种多样of mixed-signal functions to be designed alongside with high-voltage capabilities within a tiny and thermally efficient IC.
Macrocells Overview
Four High Voltage, Current Drive GPOs with low RDS_ON
Two 8-bit PWM Macrocells with build-in 16-byte register file
Two Oscilllators:
- 2.048 kHz oscillator
- 25 MHz oscillator
Two High Speed General Purpose Rail-to-Rail Analog Comparators with Integrated Voltage Reference
Differential Amplifier with Integrator and Analog Comparator
Two Current Sense Comparators with Integrated Voltage Reference
Twelve Combination Function Macrocells:
- Three Selectable DFF/Latch or 2-bit LUTs;
- One Selectable Programmable Pattern Generator or 2-bit LUT;
- Six Selectable DFF/Latch or 3-bit LUTs;
- One Selectable Pipe Delay or Ripple Counter or 3-bit LUT;
- One Selectable DFF/Latch or 4-bit LUT
I2C Serial Communication Macrocell
Temperature Sensor
Filter with Edge Detector
Programmable Delay with Edge Detector
Power On Reset (POR)
Features
Up to 13.2V High Voltage and up to 2A High Current Drive GPOs
Full H-Bridge and Independent Half-Bridge Control.
Flexible 8-bit PWMs Macrocells
Constant Current Regulation
Constant Voltage Regulation
Two Wide Range Power Supply Inputs:
- 2.5 V (±8 %) to 5.0 V (±10 %) VDD
- 3.3 V (±10 %) to 12.0 V (±10 %) VDD2
Built-in Protections:
- Undervoltage Lockout
- Overcurrent Protection
- Thermal Shutdown
I2C control
Operating Temperature Range: -40 °C to 85 °C
One Time Programmable Non-Volatile Memory
Low current consumption (nA level)
RoHS Compliant/Halogen-Free
亚博国际官网平台网址
Smart Locks and Valves
ATMs and POS Printers
MOSFET Drivers
Cameras (Video Security, DSLRs)
Toys
Robotics
Personal Computers and Servers
Office Equipment
Personal and Medical Care Devices
Other Consumer Electronics
Packages and Ordering
SLG47105V: STQFN-20: (2.0 x 3.0 x 0.55 mm, 0.4 mm pitch)
The product ID suffix indicates the package style.
Stay connected
Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.
Inquiries 分销商和Representatives Register for newslettersStay connected
Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.
Inquiries 分销商和Representatives Register for newslettersGreenPAK Configurable Mixed-signal IC Introduction
GreenPAK Designer Software
GreenPAK Development Platform
Choosing the Right GreenPAK
View the full list of the GreenPAK videos in ourTraining Video Library.
Stay connected
Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.
Inquiries 分销商和Representatives Register for newslettersThis product is available in one package:
SLG47105V: STQFN-20: (2.0 x 3.0 x 0.55 mm, 0.4 mm pitch)
Development board selector
Provides full programming, emulation and testing functions for GreenPAK devices. For use with SLG46xxxX-SKT sockets kits.
Working in tandem with the GreenPAK Designer software, GreenPAK Advanced Development Board allows designers to:
- Program custom samples in minutes
- Test GreenPAK projects in-circuit
- Develop using any GreenPAK device
- Programming
- Emulation
- Signal and Logic Generators
- USB interface
- MacOS, Windows and Linux compatible
- 编程和仿真
- Gated expansion header for connection to external test equipment
- Integrated signal and logic generators
- LEDs for visual indication
Perfect for breadboarding and fast prototypes.
Working in tandem with the GreenPAK Designer software, GreenPAK DIP Development Board allows designers to:
- Program custom samples in minutes
- Test GreenPAK projects in-circuit
- Programming
- Emulation
- USB interface
- MacOS, Windows and Linux compatible
- 编程和仿真
- Gated expansion header for connection to external test equipment
Provides advanced emulation and testing functions for select GreenPAK devices.
Working in tandem with the GreenPAK Designer software, GreenPAK Pro Development Board allows designers to:
- Program custom samples in minutes
- Test GreenPAK projects in-circuit
- Develop using select GreenPAK device
- Programming
- Emulation
- Signal and Logic Generators
- High Speed Signal and Logic Generators
- Logic Analyzer**
- USB interface
- MacOS, Windows and Linux compatible
- 编程和仿真
- Gated expansion header for connection to external test equipment
- Integrated high speed signal and logic generators
**This feature is not available at the moment and will be added through the software update
GreenPAK Advanced Development Board
- Programming
- Emulation
- Signal and Logic Generators
GreenPAK DIP Development Board
Perfect for breadboarding and fast prototypes.
Working in tandem with the GreenPAK Designer software, GreenPAK DIP Development Board allows designers to:
- Program custom samples in minutes
- Test GreenPAK projects in-circuit
- Programming
- Emulation
GreenPAK Pro Development Board
Provides advanced emulation and testing functions for select GreenPAK devices.
Working in tandem with the GreenPAK Designer software, GreenPAK Pro Development Board allows designers to:
- Program custom samples in minutes
- Test GreenPAK projects in-circuit
- Develop using select GreenPAK device
- Programming
- Emulation
- Signal and Logic Generators
- High Speed Signal and Logic Generators
- Logic Analyzer**
Other components
Programmable Mixed-signal Matrix. Two Power Supply Inputs: 2.5 V to 5.0 V and 3.3 V to 12.0 V. 8-GPIO, 4 HV GPO with current up to 2A per Output, 2 PWM, 2 ACMP, 2 CCMP, Integrator, 17 LUTs (max.), 15 DFF/LATCH (max.), 5 CNT/DLY (max.) and other Macrocells. Package STQFN-20 (2.0 x 3.0 mm).
Price table:
Qty | 100-8,999 | 9,000-49,999 | 50,000+ |
---|---|---|---|
Price | $0.50 | $0.433 | Contact Dialog |
Programmable Mixed-signal Matrix. Two Power Supply Inputs: 2.5 V to 5.0 V and 3.3 V to 12.0 V. 8-GPIO, 4 HV GPO with current up to 2A per Output, 2 PWM, 2 ACMP, 2 CCMP, Integrator, 17 LUTs (max.), 15 DFF/LATCH (max.), 5 CNT/DLY (max.) and other Macrocells. Package STQFN-20 (2.0 x 3.0 mm).
Price table:
Qty | 3000-8,999 | 9,000-49,999 | 50,000+ |
---|---|---|---|
Price | $0.50 | $0.43 | Contact Dialog |
Included are: SLG4SA20HV-20x30 socket adapter, 50 SLG47105V samples.
Evaluation Board for SLG47105V. Developed for testing designs with all features and high current loads.
HVPAK SLG47105 Demo Board.
Developed for testing designs based on SLG47105 with built-in DCM, Stepper Motor and LED.
20-pin DIP Proto Board. Perfect for breadboarding and fast prototypes.
Stay connected
Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.
Inquiries 分销商和Representatives Register for newsletters2 weeks ago
GFET as alternative
Posted byVolodymyrMelnykM40 points 6 repliesHi guys !
In our original design, we're using RT9742SNGV on 3V3(0.5A) net but unfortunately, Richtek has shortage issues.
Is GFET's has some alternatives? Small package, low pin count, reverse voltage detection are the critical.
2 weeks ago
Good, regarding questions:
1. Not really
2. It's better without it
3. Anything that'll dissipate less than typical Schottky diode fits well.
4. No need
5. Source net has backup power so Reverse Voltage detection is the must-have.
SLG59M1748 is what I was looking for but can't find it available.
Is the vendor will be available to purchase it in small quantities (100-200) for prototyping?
What's the lead time for this part?
2 weeks ago
Hi Volodymyr.
Thank you for answering the questions and happy to hear 1748 will work for you. Using this link you can order min 200pcs for evaluation.
SLG59M1748C | Dialog (dialog-semiconductor.com)
Regarding lead time, so do you mean for small quantities or if you order more?
2 weeks ago
Petro,
yes, that one is a nice part.
Thank you for the handy link.
Need lead time for the bigger quantity.
2 weeks ago
Hi Volodymyr,
Please advise how much do you want, so I can advise lead time? If we don't have enough samples, so typical lead time is up to 8 weeks but if we have it available it will be much sooner.
2 weeks ago
Hi Volodymyr. Thank you for your request. I have few questions to you:
1. Do you need internal active current limit protection as your current part?
2. Do you need internal discharge as your current part?
3. What is the preferable RDS(ON)?
4. Do you need UVLO as your current part?
5. Do you need Reverse Voltage detection as well as current part or just reverse blocking when chip is off will be enough?
In general we can suggest few part numbers that may work for you.
1.//www.xmece.com/products/load-switches/slg59m1748cThis part doesn't have internal ACL, UVLO, Discharge, Thermal protection but it has low RDS(ON) and Reverse voltage detection and reverse current blocking.
2.//www.xmece.com/products/load-switches/slg59m610vThis part have internal ACL, short circuit protection, Discharge, Thermal protection, Adjustable slew rate, low RDS(ON) but only Reverse current blocking when chip is OFF. Also this part doesn't have UVLO.
3.//www.xmece.com/products/load-switches/slg59m1714vThis part have adjustable internal ACL, short circuit protection, UVLO, Discharge, Thermal protection, Fixed slew rate, low RDS(ON) but only Reverse current blocking when chip is OFF. In addition this part have Analog output current monitor and FAULT signalling.
Please let me know if you have any questions or how can I help you further.