12-GPIO, 4 ACMPs, I2C, 23 LUTs (max.), 8 CNT/DLY (max.), 21 DFF/LATCH (max.) and other Macrocells
The SLG46855-A provides a small, low power component for commonly used mixed-signal functions. The user creates their circuit design by programming the one time programmable (OTP) Non-Volatile Memory (NVM) to configure the interconnect logic, the IO Pins and the macrocells of the SLG46855-A. This highly versatile device allows a wide variety of mixed-signal functions to be designed within a very small, low power single integrated circuit.
Lifecycle status
Macrocells Overview
Two High Speed General Purpose Analog Comparators (ACMPxH);
Two Low Power General Purpose Analog Comparators (ACMPxL);
Two Voltage References (Vref):
- Two Vref Outputs;
Fifteen Combination Function Macrocells:
- Three Selectable DFF/Latch or 2-bit LUTs;
- 一个希利ctable Programmable Pattern Generator or 2-bit LUT;
- Nine Selectable DFF/Latch or 3-bit LUTs;
- 一个希利ctable Pipe Delay or Ripple Counter or 3-bit LUT;
- 一个希利ctable DFF/Latch or 4-bit LUTs;
Eight Multi-Function Macrocells:
- Seven Selectable DFF/Latch or 3-bit LUTs + 8-bit Delay/Counters;
- 一个希利ctable DFF/Latch or 4-bit LUT + 16-bit Delay/Counter;
Serial Communications:
- I2C Protocol Interface;
Programmable Delay with Edge Detector Output;
Deglitch过滤器或边缘检测器;
Three Oscillators (OSC):
- 2.048 kHz Oscillator;
- 2.048 MHz Oscillator;
- 25 MHz Oscillator;
Analog Temperature Sensor;
Power-On Reset (POR).
Features
Read Back Protection (Read Lock)
Power Supply:
- 2.5 V (±8 %) to 5 V (±10 %)
RoHS Compliant / Halogen-Free
TQFN-14 With Wettable Flanks
AEC-Q100 Grade 2
亚博国际官网平台网址
In-Vehicle Navigation
Infotainment
Advanced Driver Assistance Systems (ADAS)
Automotive Display Clusters
Body Electronics
Packages and Ordering
SLG46855-AP: FCQFN-14 (3.0 x 3.0 x 0.55 mm, 0.65 mm pitch)
The product ID suffix indicates the package style.
Stay connected
Get in touch with us directly through our worldwide sales offices, or contact one of our global distributors and representatives.
Inquiries Distributors and Representatives Register for newslettersGreenPAK Configurable Mixed-signal IC Introduction
GreenPAK Designer Software
GreenPAK Development Platform
Choosing the Right GreenPAK
GreenPAK I2C
GreenPAK SPICE Introduction
View the full list of the GreenPAK videos in ourTraining Video Library.
4 weeks ago
SLG46721 Software Simulation
Posted byJanhavi_Rane10 points 1 replyHello,
Greetings!!
I have made a design with SLG46721 and simulating it in the software. I'm using two input states. Is it possible to change the input state during the simulation?
Thanks in advance.
Regards,
Janhavi Rane
3 weeks ago
Hi Janhavi,
Thank you for reaching out to us. For simulation, in the components window, you can find a set of external components (source generators) that can be connected to your input and used to simulate different states. You can have your own customised logic patterns as well.
Please let me know if you have further questions
Kind Regards
Shivani