- 1 Terms and Definitions
- 2 References
- 3 Introduction
- 4 Background Concept
- 5探测器电路
- 6 Power Amplifier
- 7 Digital Step Attenuator
- 8 Low Noise Amplifier
- 9 SLG46582V GreenPAK Schematic
- 10 IC Circuit Features
- 11 Operation
- 12 Pin Descriptions
- 13 Raspberry Pi Control Software
- 14 Measurements
- 15 Further Design Considerations
7 Digital Step Attenuator
In this example, a digital step attenuator is used to control the amount of RF power being delivered to the amplifier. This could be used in a real-world circuit, or a microprocessor could be used to control the output of an RF chipset. The Skyworks SKY12325-350LF is a 3-bit, 7 dB digital step attenuator. When all 3 bits are at logic low, the attenuator is at maximum attenuation. At logic high, the attenuator is at minimum attenuation.